GB 24
What you need to consider
Safety instructions for the installation
• The connection must comply with national and local regulations.
• The appliance must always be earthed.
•
This appliance may only be connected by a competent electrical
installer.
•
For the connection, use an approved cable (for example type
HO7RR) in accordance with the regulations. The cable casing
should be made of rubber.
•
The connection cable must hang freely and is not to be fed through
a drawer.
•
If you want to make a fixed connection, make sure that a multi-polar
switch with a contact separation of at least 3 mm is fitted in the
supply line.
• If the connecting cable is damaged, it may only be replaced by the
manufacturer, the manufacturer’s service organisation or equivalently
qualified persons, in order to avoid dangerous situations.
• The worktop the hob is built into must be flat.
•
The walls and the worktop surrounding the appliance must be heat
resistant up to at least 85 °C. Even though the appliance itself does not
get hot, the heat of the hot pan could discolour or deform the wall.
•
Damage caused by incorrect connection, installation or use, will not
be covered by the guarantee.
• Connection point, wall mounting socket and/or plug must be
accessible at all times.
Clearance
Sufficient all-round clearance is essential to the safe use of the hob.
Check that there is enough clearance.
cooker hood
cabinet
side wall
hob
* 600 mm
INSTALLATION
