170687
Instructions for Use, Building- in and Connecting
6
Gas burner control
Cooking burners are controlled by the relevant
control knobs. Heating power is indicated on the
knobs by the large flame symbol and the small
flame symbol.
Always turn the knob over the large flame
position towards the small flame position and
back. The operating position is always between
the two flame symbols.
Safety cautions in regard to the
cooking zones
•
Never use cooking zones without dishes, or for
heating the ambience!
•
Keep the cooktop clean, since dirt and stains
have adversary effect on the functionality of
burners.
•
If you like your food to be crisp, first set the
burner to the maximum and continue cooking at
minimum power.
•
Always provide adequate quantity of water
when cooking in the pressure cooker. Lack of
water may cause damage to the dish and to the
cooker.
•
Cooktop burners are thermally protected. If
the burner flame is accidentally
extinguished (spilled food, gust of wind) the
gas supply is automatically shut. There is
no possibility of gas escaping into the
room!
•
If the flame of thermally non-protected
cooking burners is accidentally
extinguished, the gas escapes into the
room!
•
Be very precise when placing the burner crown
cap upon the crown. Always keep the crown
nozzles clean and free.
crown cap
burner crown
ceratin models only
thermal coupling
(certain models only)
correct position of
burner components
