Gorenje GBFU 50-150EDD/V9, Manual, Page: 2 / 8

16
Dear buyer, we thank you for purchase of our product.
PRIOR TO INSTALLATION AND FIRST USE OF THE ELECTRIC WATER HEATER,
PLEASE CAREFULLY READ THESE INSTRUCTIONS.
This water heater has been manufactured in compliance with the relevant standards
and tested by the relevant authorities as indicated by the Safety Certificate and the
Electromagnetic Compatibility Certificate. The technical characteristics of the product are
listed on the label affixed between the inlet and outlet pipes. The installation must be carried
out by qualified staff. All repairs and maintenance work within the water heater, e.g. lime
removal or inspection/replacement of the protective anti-corrosion anode, must be carried
out by the authorised service provider.
BUILDING-IN
The water heater shall be built-in as close as possible to the outlets. When installing the
water heater in a room with bathtub or shower, take into account requirements defined in IEC
Standard 60364-7-701 (VDE 0100, Part 701). It has to be fitted to the wall using appropriate
rag bolts with minimum diameter of 8 mm. The wall with feeble charging ability must be
on the spot where the water heater shall be hanged suitably reinforced. Due to universal
construction of the water heater it can be fixed vertically on the wall or horizontally on the
wall (output pipes must be on the left).
GBFU 50EDD/V9 GBFU 80 EDD/
V9
GBFU 100 EDD/
V9
GBFU 120 EDD/
V9
GBFU 150 EDD/
V9
A 583 803 948 1103 1318
B 365 565 715 865 1065
C 185 205 200 205 220
D 145 345 495 645 845
Connection and installation dimensions of the water heater [mm]
GB