Gorenje FTG 30-100 E5, Instructions For Use Manual

Page: 16 / 24

CONNECTING THE WATER HEATER
TO THE POWER SUPPLY NETWORK
Before connecting to the power supply network, install a power
supply cord in the water heater, with a min. diameter of 1.5 mm
2
(H05VV-F 3G 1.5 mm
2
). To do this, the protective plate must be
removed from the water heater.
In the electrical installation, please install a disconnect switch to
separate all poles from the power supply network in accordance
with the national regulations.
LEGEND
1
Connection terminal
2a Thermal cut-out
2 Thermal cut-out
3
Electronic regulator
4a Electric heating element
(1000 W or 1600 W)
4b Electric heating element
(1000 W)
5 Temperature sensor
6
Temperature sensor
L Live conductor
N Neutral conductor
Earthing conductor
CAUTION: Before any intervention into the interior of the water heater,
disconnect it from the power supply network! This intervention may only
be performed by a trained professional!
Fig. 5:
Removing the protective cover
Fig. 6: Electric installation
1
N
230 V~
H2 H1
K1
1
2
3
K2
T1
T3
T2
T4
1
2
3
L
N
L
5
6
3
2a
4b 4a
2b
489390
16
EN