Instructions for Use
8
Varnished surfaces are cleaned with a soft cloth
and an alcohol based cleaning agent (for
example glass cleaners). You may also use
alcohol (ethanol or isopropyl alcohol).
The application of abrasive and especially
aggressive cleaners, such as the stainless steel
cleaners, is not appropriate for the cleaning of
plastic and coated parts.
•
Wash the
interior
with lukewarm water and
some vinegar.
•
The air openings in the bottom rail
should be
cleaned or vacuumed periodically.
Cleaning of the condenser
Dust from the condenser unit should be
vacuumed in the following manner:
−
push your finger through the opening in the
bottom rail and release the fastener;
−
pull the rail towards you and remove it;
−
remove the bottom board of the kitchen
cabinet;
−
pull out the condenser dish;
−
use a vacuum cleaner to clean the dust from
the condenser;
−
replace the condenser dish and the bottom
rail in the opposite order.
After you have cleaned the appliance, reconnect it
to the power mains and put the food packages
back to their place.
Periodical cleaning of the condenser
In order to optimize the operation of the
appliance and save energy, it is
recommended to periodically clean the dust
from the condenser unit at the back of the
appliance.
Disconnect the appliance from the power mains
before you start cleaning it!
•
Empty the contents of the appliance.
•
Remove the support panel from the bottom of
the kitchen cabinet.
•
Remove the screws fixing the appliance to the
kitchen worktop.
•
Pull out the appliance to expose the condenser
at the back of the appliance.
•
Unscrew the screws from the condenser bonnet
and remove the bonnet.
•
Clean the dust and dirt from the condenser.
After cleaning return the appliance to its place,
plug in the power cord and fill with food.
Switch off the appliance when not in use
If you do not intend to use the appliance for a
longer period of time, disconnect the power
supply, empty the appliance, defrost it and clean it.
Leave the door slightly open.
