302967
• The appliance should be installed in a dry and well ventilated
room. The appliance will operate correctly if the environment
temperature is within the ranges listed in the table below.
The appliance class is indicated on the label with the basic
information on the appliance.
Class
Temperature
SN (subnormal)
from +10°C to +32°C
N (normal)
from +16°C to +32°C
ST (subtropical)
from +16°C to +38°C
T (tropical)
from +16°C to +43°C
Appliance installation should be carried out by at least two
persons to avoid any physical injury or damage to the appliance.
• The appliance should stand
fi
rmly in an upright position on a
suf
fi
ciently solid base. At the front, the appliance is
fi
tted with
two adjustable legs that can be used to level the appliance
(only with some models). Rear side of the appliance is
fi
tted
with wheels (certain models only) facilitating the positioning of
the appliance at the preselected place.
• If there is a kitchen furniture element above the appliance,
there should be a clearance of at least 5 centimeters between
this element and the refrigerator, to ensure suf
fi
cient cooling of
the condenser unit.
• Do not expose the appliance to direct sunlight and do not
place it near sources of heat. If this cannot be avoided, install
an insulation panel.
• Bottom front corners of the appliance is
fi
tted with handles to
facilitate moving. The appliance may stand freely or it can be
placed next to a kitchen furniture element or a wall. Mind the
space required to open the door and pull out the drawers and
shelves (see installation diagram).
Selecting the room
Installing the appliance
7
Installation and connection
Downloaded from Fridge-Manual.com Manuals
