background image

Instructions for Use

14

1

  Upper hinge fastener

5

  Kick plate or control panel

2

  Upper hinge washer

6

  Cover plate of the lower hinge

 Lower hinge

7

  Fixture plug of the door hinge

4

  Lower hinge washer

8

  Door hinge fixture

 Trouble Shooting Guide

During the service, you can come across some troubles that
in most cases result from improper handling of the appliance
and can easy be eliminated.

The appliance Fails to Operate After Connecting to the
Mains Supply



Check  whether there is a voltage in the mains supply
socket and if the appliance is not set to the position

STOP

.

The Red Light is On



The door was frequently opened or it was left opened for
too long.



The door is not properly closed (the door may sag, the
gasket may be polluted or damaged).



Power supply has been interrupted for a longer period of
time.



Perhaps you have overloaded the appliance with fresh
foods.

Continuous Operation of the Refrigerating System



Set the operation mode selection switch from continuous to
automatic operation.



The reason may be inadequate ventilation of the
compressor and condenser (assure adequate air
circulation behind the appliance and wipe the dust from the
condenser).

The Freezer Door is Hard to Open

If you want to open the door that has just or recently been
closed, you may find them hard to open. The reason why this
happens is, that when you open the door, warm air gets into
the appliance and when it is cooling, the underpressure seals
the door.
Door can be opened more easily by slightly pressing the
gasket against the door and pulling the door toward you.
After few minutes (5-10), the door can easily be opened.

Noise

Cooling in refrigerating-freezing appliances is enabled by the
refrigerating system with compressor, which produces noise.
How noisy the appliance is depends on where it is placed,
how it is used and how old the appliance is.



During the operation 

of the compressor the noise of liquid

is heard and when the compressor is not operating, the
refrigerant flow is heard. This is a normal condition and it
has no influence whatsoever on the lifetime of the
appliance.



After starting the appliance, 

the operation of the

compressor and the refrigerant flow may be louder, which
does not mean that something is wrong with the appliance
and it has no influence on the lifetime of the appliance.
Gradually the noise is reduced.



Sometimes 

unusual and stronger noise 

is heard, which

is rather unusual for the appliance. This noise is often a
consequence of inadequate placing.
(The appliance shall be placed and levelled firmly on solid
base and it should not touch the wall or kitchen units
standing next to it.)

WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO INFLUENCE

ON THE OPERATION OF THE APPLIANCE

.

Reviews: