Instructions for Use
3
mode selection switch to the setting for
automatic operation as soon as possible.
•
Before freezing packages of fresh foods,
make sure they are cooled to ambient
temperature.
•
Ice and frost layer increase energy
consumption, so do clean the appliance as
soon as the layer is 3-5 mm thick.
•
If the gasket is damaged or if it turns out that
the sealing is poor, the energy consumption
is substantially higher. To restore efficiency,
replace the gasket.
•
The condenser on the rear wall should
bealways clean, free of dust or any
impurities.
•
Always consider instructions stated in
sections Positioning and Energy Saving
Tips, otherwise the energy consumption is
substantially higher.
•
Sound alarm reminds you to close the door
immediately, in order to save energy.
Important
•
If you've bought this appliance to replace an
old one equipped with a lock that cannot be
opened from inside (lock, bolt), make sure
that the lock is broken. This will make it
impossible for the children to lock
themselves in the appliance and suffocate.
•
Mind to connect the appliance correctly to
the mains supply (see Connection to the
Mains Supply).
•
Do not touch the cooled surfaces while the
appliance operates, especially not with wet
hands, because the skin might stick to the
cold surfaces.
•
Do not freeze bottled drinks, especially not
fizzy ones such as mineral water, sparkling
wine, beer, cola etc., because liquid expands
during freezing and the glass bottle is very
likely to blow up.
•
Never try to eat frozen food (bread, fruit,
vegetables), because you may get frostbites.
•
Carefully check the foods for color and smell
and if you are in doubt about their quality,
throw them away because they may be
spoiled and therefore dangerous to eat.
•
Disconnect the appliance from the mains
before repairing (only a qualified technician
should repair it) and before cleaning.
•
Do not defrost the appliance with other
electric devices (hair dryer etc.) and never
scrape the ice or frost layer with sharp tools.
Use only enclosed tools or tools
recommended by the manufacturer.
•
For the sake of environment protection - be
careful not to damage the rear wall of the
appliance (the condenser unit or the tubes -
for example when moving the appliance) or
any part of the refrigerating system inside the
appliance.
•
The refrigerating system of the appliance is
filled with refrigerant and oil, so when the
appliance is damaged, handle it with care
and dispose it of in compliance with
environmental protecting precautions. (See
We Care for the Environment).
•
Heating element incorporated in the
appliance, all around the rim, is controlled by
the operation of the compressor and it
prevents the door gasket to freeze on to the
freezer housing.
•
If the supply cord is damaged, it must be
replaced by the manufacturer or his service
agent or a qualified person in order to avoid
hazard.
•
The rating plate is in the interior or on the
rear wall of the appliance.
The symbol on the product or on its
packaging indicates that this product
may not be treated as household
waste. Instead it shall be handed over
to the applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which
could otherwise be caused by inappropriate
waste handling of thisproduct. For more
detailed information about recycling of this
product, please contact your local city
office, your household waste disposal
service or the shop where you purchased
the product.
Storing Time During Power Supply
Interruption
Avoid opening the freezer in case of failure or
power supply interruption! In case the
interruption is extended over longer period of
time (17 hours), take food out of the freezer
