436556
As soon as a hot coking zone is switched off , or when the
entire cooking hob is turned off , the following is displayed
on the display of each hot cooking zone:
-
“H”
if the cooking zone is still hot;
-
“h”
if the cooking zone is cooling down and is warm to
touch.
The duration of this display is calculated given the power
level and depends on how long the cooking zone has been
activated. When the “H” or “h” sign goes off , the cooking
zone may in some cases (power failure, a hot pan left on
the cooking zone) still be hot. Be careful, as there is a
risk of burning. If a power failure has occurred when the
cooking zones were hot, the indicator “H” or “h” will fl ash.
This is to warn you that the cooking zone may still be hot,
but not necessarily, depending on how long the power
supply was out of order.
The appliance has been tested at the factory. This
test includes heating up all cooking and warming
zones; therefore, “H” symbol may flash on the
display for a while after the appliance is first
connected to the power mains.
When this function is activated, the cooking zone will
operate at the highest possible level for a certain period
of time, depending on the selected power level; after this,
the cooking zone will automatically switch to the initially
selected level and continue operating. The power boost
function may be activated for each cooking zone, for any
power level, except for power level “9”, as in this case the
cooking zone is constantly operating at full power.
Activating the power boost function
• Set the power level to 9.
• Press the “+” (G) sensor key. Indications “A” and “9” are
shown on the display alternately.
• Reduce the power level to the desired level at which the
cooking is to continue.
The symbol “A” and the selected power level will be
indicated alternately on the display. When the power
boost function has expired, the cooking zone will switch
automatically to the selected level which is then indicated
permanently on the display.
If the power level is changed during the power
boost on a particular cooking zone, the power
boost function is immediately deactivated.
Residual heat
indicators
Power boost function
13
