background image

Instructions for use, mounting and connection

14

 Attention

• 

The appliance may be installed and connected
to mains by qualified personnel only.

• 

Particular areas of the appliance get hot during
operation (vicinity of the heating plates). Make
sure children are kept out of reach and warn
them accordingly.

• 

Overheated oil may suddenly ignite. Constant
monitoring should therefore be assured during
the preparation of such dishes that require the
use of oil (like chips).

• 

Heating zones may not be left switched on
empty, without dishes.

• 

Do not use the appliance for room heating.

• 

Do not use the glass ceramic plate as a
working top. Sharp objects may cause
scratches.

• 

Preparation of food in aluminum or plastic
dishes upon hot plates is not allowed. Do not
place any plastic objects or aluminum foil upon
hot plates.

• 

If any other electric appliances are plugged in
close to the hotplates, prevent the cord to come
into contact with the hotplate.

• 

Do not store any temperature sensitive objects
below the hotplates, like cleaners, sprays, etc.

• 

Do not use cracked or broken glass ceramic
plates. If a crack is detected, switch off the
electric supply immediately.

• 

In case of any failures disconnect the appliance
from mains and call service assistance
immediately.

Technical Data

Type

SVK65E-4

SVK64E-4

SVK63S-4

SVK62E-4

SVK61E-4

Mains voltage

2N AC 400 V

Operating voltage

230 V, 50 Hz

Type of control knobs

S= gradual increase
E= sliding increase of power with power regulators

Cooking zones
(

φ

 mm/kW)

S= standard plate
HL=HI- light plate
HA=halogen plate

Front left
Rear left
Rear right
Front right

180/1,8/HL
145/1,2/HL
180/1,8/HL
145/1,2/HL

180/120/1,7/HL

145/1,2/HL

180/120/1,7/HL

145/1,2/HL

180/1,7/S
145/1,2/S
180/1,7/S
145/1,2/S

120/180/1,7/HL

145/1,2/HL
180/1,8/HL
145/1,2/HL

120/180/1,7/HL

145/1,2/HL

180/1,8/HA

145/1,2/HL

Total power (kW)

 6,0

 5,8

5,8

5,9

5,9

Fire protection
compliance class

Y

Summary of Contents for ECS63EHL









Reviews: