background image

233036

Turn on the cooking zones for 3 to 5 minutes and select the 
maximum power level; some fumes may be discharged from the 
hob. This way, the protective cover on the cooking hob will reach 
its maximum solidness.

•  Do not turn on a cooking zone without a pan over it, and never 

use the cooking hob for room heating!

•  Make sure the cooking zones and pan bottom are clean and 

dry, and that suf

fi

 cient heat transmission is enabled between 

them, in order to prevent any damage to the heating surface. 

•  Any fat or oil left on the cooking ones may ignite. Therefore, 

be careful when using fat and oil to prepare food (e.g. French 
fries).

•  Do not place a damp pan or a steam-covered lid on the 

cooking zones, as moisture is detrimental to them. 

•  Do not leave a hot pan to cool down on the cooking zones, 

because moisture will be generated under it, causing 
corrosion.

Before using the 
appliance for the 

fi

 rst 

time

Before using the 
appliance for the 

fi

 rst 

time

Important warnings

Important warnings

1.

  Cooking zone rear left

2.

  Cooking zone front left

3. 

 Cooking zone  front right

4. 

 Cooking zone rear right

4

Appliance description

Cooking zones

Summary of Contents for ECD 620 EX













Reviews: