233036
• Cooking hobs can be installed into worktops that are 30 to 50
mm thick.
• The kitchen furniture element underneath the hob should not
be
fi
tted with a drawer. If the kitchen furniture element as a
horizontal partition wall, it should be installed no less than 10
centimeters from the lower surface of the worktop. The space
between the partition wall and the hob must be empty; no
objects should be placed into that gap.
• On the furniture back wall there should be a cutout with width
of at least 175 mm along the entire width of the furniture
element.
• Only type
EVP4, EVP2...
ovens
fi
tted with a cooling fan may
be installed underneath this cooking hob.
• Before installing an oven, the rear wall of the kitchen furniture
element should be removed in the area of the cooking hob cutout.
• The worktop should be installed completely horizontally.
• The cutoff surfaces should be appropriately protected.
• Attach the fastening elements (4) with the supplied screws (4)
to the left and right wall of the cooking hob and the worktop
cutoff.
• Connect the cooking hob to the power mains (see instructions
for connecting a cooking hob on a power network).
• Insert the cooking hob into he cutoff and press it heavily from
above against the worktop.
• For screwing down the
fi
xing clip it is not allowed to use
screws longer than 6,5 mm.
Installation procedure
Installation procedure
10
Kitchen worktop cutout
dimensions
