Gorenje DVG 8340 E, Instructions For Use Manual, Page: 11 / 16

11
The lowest and medium speeds should be used under normal conditions and with low concentration of
fumes. The top speed should be used in case of high concentration of kitchen fumes, e.g. during frying or
grilling.
All safety instructions included in this manual shall be observed without exception!
Grease filters and active carbon filters should be cleaned and replaced according to manufacturer’s
instructions, or more frequently in periods of intensive use (more than 4 hours a day).
If a gas cooker is used it is forbidden to leave uncovered flame. When removing pots from gas burners set the
flame to its minimum level.
Always make sure that flame does not extend outside the pot. Such a situation causes undesired energy losses
and dangerous heat build-ups.
The hood should not be used for other purposes than those for which it was designed.
Operation of the hood can be controlled by means of a combined switch.
Fig. 4
- - informaton about mode of work the hood
- „0, 1, 2, 3”, - motor speed selection buttons.
- „ ” – lighting on / off.
Regular maintenance and cleaning of the device will guarantee its good and fault-less operation, and extend
its life. Attention should be paid to replacing grease and carbon filters according to manufacturer’s
instructions
.
1. Cleaning.
Grease filters should be cleaned every two months during normal operation of the hood, in a dishwasher or
manually, using mild detergent or liquid soap.
2. Replacement
To dismantle the filter proceed as follows:
a) remove the bottom cover by releasing the lock catch,
b) remove the metal grease filter
1. Operation.
VI Operation and maintenance
1. Operational safety
2. Operation
2.1 Control panel
3. Maintenance
3.1 Metal grease filters
3.2. Carbon filter