5
350077
A damaged power cord may only be replaced by a
person authorized by the manufacturer.
Air in the dryer environment should not contain dust
particles.
Exhaust air must not be discharged into a flue which is
used for exhausting fumes from appliances burning gas
or other fuels.
The air where the dryer is installed
, should be well
ventilated to prevent feedback of gases released from
the gas appliances with open fire (e.g. fireplace).
Clean the filters after each drying cycle.
If you have
removed the filters, replace them before the next
drying cycle.
After each cleaning insert the condenser back into
the air duct (depending on model). Operation of
the appliance without condenser, or with damaged
condenser is extremely dangerous and may cause fire.
Always switch off the dryer after use
(the program
selector switch should be in the "OFF" position) and
unplug the power cord from the wall outlet (to prevent
the hazard of lightning or voltage overload).
