40
350077
Problem/error
Cause
What to do ...?
The dryer does not work.
• No voltage in the power
outlet
• Check if the power cord plug
is correctly inserted into the
power outlet.
• Check the fuse.
There is voltage in the
outlet, but the drum
does not spin and the
dryer does not work.
• Program was not started
in accordance with the
instructions.
• The door is not properly
closed.
• Condensate tank is full
(condensation dryer only).
• Delayed start function has
been selected.
• Reread the instructions for use
again.
• Push the door towards the
appliance.
• Empty the condensate tank
(see section Cleaning and
Maintenance).
• Wait until delayed time elapses.
Laundry is not dried, or
drying temperature is
longer than 4h.
• Filters are not clean. The
room is not sufficiently
ventilated.
• Inappropriate temperature
in the room.
• Laundry was not sufficiently
wrung or spun.
• Amount of laundry dried in
the appliance is too large or
insufficient.
• Clean the filters.
• Install the dryer in an
appropriate room (see section
Installation ...)
• Check if the temperature in
the room where the dryer is
installed is too high (over 25°C)
or too low (below 10°C).
• Check the length of the
evacuation tube - max. 2 m
(only for air vented model of the
dryer).
• Laundry inserted into the dryer
was not sufficiently wrung or
spun, or an inappropriate drying
program was selected.
• Use an appropriate program or
use the timed program. Increase
the final level of dryness for the
selected program (intensive
drying function).
Poor condensation
(condensation dryer
only)
• Inadequate location of the
dryer.
• Check whether the ambient
temperature of the room is not
too high.
• Check whether the condenser is
clean.
Unevenly dried laundry.
• The amount of laundry
dried at a time is too large.
• Drying the pieces of
different thicknesses
• Drying the different types
of laundry
• Make sure the laundry is sorted
by type and size of items given
the selected program (see
section Drying – Preparing
the Laundry and the Program
Table).
Error in the drum
lighting.
• There is no lighting when
the dryer door is opened.
• Disconnect the dryer from
the power mains and call an
authorized service unit.
When all lamps are blinking switch the appliance off and call nearest authorized service
shop (assistance center).
