Gorenje Classico, Detailed Instructions For Use

Page: 16 / 48

16
789074
In order for the oven to operate, press the (A) knob and hold it for two seconds. Time
display will stop flashing.
The oven can be used without restrictions if no timer settings are made.
OVEN OPERATION WITH PROGRAM TIMER SETTINGS
Program timer can be used to program oven operation in two ways:
A) Setting the stop time
This mode allows you to set the time at which you wish the oven to stop operating. The
longest possible setting is 15 hours from the current time.
• Check if the clock is set accurately to current time.
• Select the (2) symbol by consecutively pressing the (A) knob until the symbol starts to
fl ash.
• Rotate the (A) knob to set stop time.
• Confi rm the setting by pressing the (A) knob again. Clock hands will move to time
display. The oven stop symbol will light up.
• Switch on the oven (use the oven knobs to set the operating mode and temperature).
The oven will start t operate at the set time and stop and the selected stop time.
• When the clock reaches the selected stop time, the oven will be switched off , which will
also be indicated by an intermittent acoustic signal. The acoustic signal can be switched
off by pressing the (A) knob; otherwise, it will switch off automatically after 1 minute.
The symbol (2) will fl ash. To continue cooking, press the (A) knob and hold it for 2
seconds, and set a new cooking time if necessary.
B) Setting the delayed start
This mode allows you to specify the time when the oven should start to operate (cooking
start time) and the time when you wish the cooking process to stop (end time).
The start of the cooking process can be delayed by a maximum of 12 hours relative to
the current time, and the time when the cooking process is to end can be set for up to 15
hours in advance.
• Check if the clock is set accurately to current time.
• Setting the start time: Select the (1) symbol by pressing the (A) knob. Rotate the (A)
knob to set the start time and confi rm it by pressing the (A) knob. The symbol for the
end of operation will start to fl ash (2).
• Set the stop time: Rotate the (A) knob to set the stop time and confi rm it by pressing
the (A) knob.
• The clock hands will turn to clock display. Symbols (1) and (2) will be lit up.
• The timer will wait for the start of the cooking process.
• Set the oven – use the oven knobs to set the operating mode and temperature.
• The oven will start to operate at the start time, and stop operating at the stop time.
• When the clock reaches the selected stop time, the oven will be switched off , which will
also be indicated by an intermittent acoustic signal. The acoustic signal can be switched
off by pressing the (A) knob; otherwise, it will switch off automatically after 1 minute.
The symbol (2) will fl ash. To continue cooking, press the (A) knob and hold it for 2
seconds, and set a new cooking time if necessary.