background image

559100

small children in the vicinity of the cooker and warn them about the danger of burns.

•  Hot grease is highly infl ammable, so pay extra attention when preparing food with grease or oil. Frying 

in fat or oil (chips) may be carried out only under constant surveillance.

•  Hotplates may not operate empty, without dishes placed on top.
•  Never use the appliance for heating of the room.
•  In case of any detected malfunction immediately disconnect the appliance from the mains supply and 

call the service.

•  The appliance is manufactured in compliance with the relevant effective safety standards. 

Nevertheless, we strongly recommend that persons with impaired physical, motoric, or mental 
capacity, or persons with inadequate experience or knowledge, do not use the appliance unless 
attended by a qualifi ed person. The same recommendation applies when the appliance is used by 
persons of less-than-legal age.

 

The symbol on the product or on its packaging indicates that this product may not 
be treated as household waste. Instead it shall be handed over to the applicable 
collection point for the recycling of electrical and electronic equipment. By ensuring 

this product is disposed of correctly, you will help prevent potential negative consequences 
for the environment and human health, which could otherwise be caused by inappropriate 
waste handling of this product. For more detailed information about recycling of this 
product, please contact your local city offi ce, your household waste disposal service or the 
shop where you purchased the product.

Special warning for glass ceramic hob

•  Glass ceramic hob is tough, but not unbreakable. Should any sharp or heavy objects fall upon 

the surface, they may cause damage.

•  CAUTION: In case of hotplate glass breakage:
  - Immediately shut off all the burners and isolate them from the power supply.
  - Do not touch the appliance surface.
  - Do not use the appliance.
•  Sand particles or rough wrought iron pot bottoms may also produce scratches upon the glass 

ceramic surface.

•  In case the glass ceramic hob is used as a worktop it may be damaged or scratched. Never heat 

up the food in aluminium foil or plastic dishes, otherwise you may damage the hob or cause 
melting of material and fi re.

4

Summary of Contents for 4106...

























Reviews: