Gorenje Tiki TC 200-1/S, Instructions For Use Manual, Page: 44 / 132

44
Dear customer, thank you for purchasing our product.
PLEASE READ THE INSTRUCTIONS CAREFULLY PRIOR TO THE INSTALLATION AND FIRST USE OF
THE WATER HEATER WITH HEATING PUMP.
The water heater with heating pump has been manufactured in compliance with the relevant standards. Basic
technical characteristics of the product are listed on the label attached to the protective cover.
The installation of the water heater with heating pump must be carried out by quali.ed staff only. All repairs and
maintenance work in the interior of the water heater as well as limestone removal or testing or replacement of the
corrosion protection anode may only be carried out by an approved maintenance service provider. Please take
into account instructions for safe operation and measures in case of malfunctions.
The water heater has been manufactured so as to allow alternative sources of energy besides electricity to be
used, as follows:
- central heating hot - water system
- solar power
- electric heating element
This version of heating pump is used for heating the consumption water for households and other consumers,
where daily consumption of hot water (50°C) never exceeds 400 to 700 l. During the operation of the heating
pump the temperature of the ambient (usually the cellar) is reduced, hence the double effect of the heating pump:
heating of hot water - cooling of the room. The operation of the heating pump is fully automated.
This is a compact version of the heating pump, incorporating compressor and evaporator installed either on top
of the hot water tank (TČ 200–1/Z, TČ 300-1/Z, TČ 300-2/Z) or on side (TČ 200-1/S, TČ 300-1/S, TČ 300-2/S).
TECHNICAL CHARACTERISTICS THE WATER HEATER WITH HEATING PUMP
Type
TČ 200–1/Z TČ 200-1/S TČ 300-1/Z TČ 300-1/S TČ 300-2/Z TČ 300-2/S
Volume [ l ] 200 285 280
Rated pressure
[ MPa ] 0,6
Weight / Filled with water [ kg ] 112 / 312 142 / 427 164 / 445
Anti-corrosion protection of tank Enameled / MG Anode
HE heated surface - lowe
[ m
2
] 0,85 1,45 1,45
HE heated surface - upper
[ m
2
] - - 0,90
HE volume - lower
[ l ] 5,3 9,1 9,1
HE volume - upper
[ l ] - - 5,7
Insulation thickness
[ mm ] 57
Degree of protection IP 21
H1, H2 - Canal for palps
h1, h2 - Position of palps
HP - Heating pump
HE - Heat exchanger
G* - When HP on side
H* - When HP on top
TČ 200-1/Z-S TČ 300-1/Z-S TČ 300-2/Z-S
H1 300 480 480
H2 - - 300
h1 100 155 155
h2 - - 210
GB