Gorenje Plus GDV642X, Operating Instructions Manual, Page: 84 / 200

6
Select options
To select an option, press one of the option
buttons. The field under the button lights
when the option is activated. The available
options depend on the selected programme. Once
you have started the programme, the options you
selected are saved for the next time you use the
same programme. An exception is the Delayed start
option.
High temperature
Activate this option for improved dishwashing
results. The machine then uses a higher temperature
for the main wash.
If you want to use the lower temperature, press again
so that the field under the button turns off.
You can vary the temperature as shown below:
55 °C/ 70 °C Heavy wash:
60 °C/ 65 °C Normal wash:
60 °C/ 65 °C Daily wash:
30 °C/ 60 °C Quick wash:
30 °C/ 60 °C Super Quick wash:
40 °C/ 50 °C Delicate wash:
55 °C/ 60 °C Eco wash:
Long dry
A higher temperature in the final rinse and a longer
drying phase improves the drying result if you
activate the Long dry option. This causes a slight
increase in energy consumption. This option can be
used with all programmes except Auto wash, Rinse
& Dry and Rinse & Hold.
If you want a programme with Short dry, press again
so that the field under the button turns off.
Delayed start
When you select Delayed start, the dishwasher will
start 1-24 hours after you press the Start/Stop button.
1. Press the button once to activate Delayed start.
Press the button several times – or hold it in –
to set the desired number of hours.
2. Press Start/Stop and the dishwasher counts
down 1 hour at a time and starts after the
selected delay.
Press and hold Start/Stop for three seconds if you
want to cancel the Delayed start option.
NOTE!
Remember to press the Start/Stop button to start
the programme.
7
Press Start/Stop and close the
door
The display flashes three times with the
remaining time to indicate that the
programme has started. Close the door properly,
otherwise the dishwasher will not start. The display
indicates if the door is open.
NOTE!
If the machine does not start within 2 minutes of
the last button press, the display returns to showing
the last programme run.
Time remaining
Once you have selected a programme and options,
the display indicates how long the programme took
the last time it was used. The remaining time is
updated after the water for the final rinse has been
heated.
This may differ somewhat from time to time
depending on the temperature of the water supply,
the amount of dishes, the ambient temperature and
other factors.
NOTE!
During the first run of each programme, the
remaining time displayed can be slightly
misleading, as the dishwasher is estimating the
time. When you run the programme a second time,
the dishwasher will calculate the remaining time
based on the previous duration of the programme.
84 English
Dishwashing