
8.
Installing the UF Membrane Element:
• Remove the housing cap using the Small Wrench (F2) as shown
below
• Remove all protective packaging from the UF Element and insert
it back into the housing as shown below
• Replace the housing cap and tighten it with the Small Wrench
• DO NOT OVER-TIGHTEN THE FILTER HOUSING
Flushing the system:
Once the GOPURE UF-5 WATER PURIFIER is fully installed,
flush it by running 10 litres of water through the system.
This must be done before consuming water from the unit.
• Before fully opening the Tee Fitting Valve, open the valve
very slowly to pressure check the housings for any leaks as
shown below