4
Assembly Instructions
STEP 1
：
STEP 2
：
Open the carton, get out the above
spare parts, and put the Main Frame
onto the level ground.
1
、
Holding the computer frame and
uprights, unscrew bolt M8*16(51) and
lock washer
（
64
）
off right uprights, use
the 5# Allen wrench to lock the
computer and upright tube tight by
screw M8*16(51) and lock washer
（
64
）
See as left picture.
Notice: do not press wires inside the
tube and check if wires are connected
well. Support the upright with hand to
avoid computer & upright falling down.