Hardware
2-26
basicCON 4121 – User Manual
The following table shows the assignment of the „ETH over APIX“
connector:
Pin
Signal
Annotation
1
TX1+
Pos. TX Signal of ETH Port1
2
TX1-
Neg. TX Signal of ETH Port1
3
RX1+
Pos. RX Signal of ETH Port1
4
TX2-
Neg. TX Signal of ETH Port2
5
TX2+
Pos. TX Signal of ETH Port2
6
RX1-
Neg. RX Signal of ETH Port1
7
RX2+
Pos. RX Signal of ETH Port2
8
RX2-
Neg. RX Signal of ETH Port2
The electrical signal properties correspond to the IEEE802.3 standard.
The module can be connected via an Ethernet port or via two ports
(separated for both directions when routing through).
For the connection via two Ethernet ports we offer an Adaptor with
two seperate RJ45 sockets.