Installation
1-2
basicCON 4115 – User Manual
1.2
Driver Installation
For proper installation of the
GOEPEL electronic
USB drivers on your
system, we recommend to execute the
G-USB
driver setup.
To do that, start the
G-USB-Setup-*.exe setup program (of the
supplied CD, “*” stands for the version number) and follow the
instructions.
At present, the available device driver supports Windows
®
2000/ 7/
and XP systems.
After driver and hardware installation, you can check whether the
devices are properly embedded by the system (for example by means
of the Windows
®
Device Manager):
Please note that the Device Manager shows ALL USB controllers
supported by this driver.
If required, your
basicCON 4115
can also be controlled via the serial
RS232 interface.
Then, the
G-USB
driver setup is not necessary, but the device can
NOT be operated by the
G-API
.
Figure 1-1:
Display of Device Manager
