Gopel Electronic basicCON 4115, User Manual

Page: 16 / 21

Hardware
2-10 basicCON 4115 – User Manual
The DS90C385A top-board is operating with five LVDS channels
(4x RGB data, 1x clock).
Therefore it has the following 36-pole connector:
MDR N10236-52B3PC
of 3M
Pinout:
1 – LVDS 0– 2 – LVDS 1– 3 – LVDS 2– 4 – LVDS Clk–
5 – LVDS 3– 6 – GND 7 – NC 8 – NC
9 – NC 10 – NC 11 – NC 12 – NC
13 – NC 14 – NC 15 – NC 16 – NC
17 – NC 18 – NC 19 – LVDS 0+ 20 – LVDS 1+
21 – LVDS 2+ 22 – LVDS Clk+ 23 – LVDS 3+ 24 – NC
25 – NC 26 – NC 27 – NC 28 – NC
29 – NC 30 – NC 31 – GND 32 – NC
33 – NC 34 – NC 35 – NC 36 – NC
Shield – GND
For the INAP125T24 APIX 1 transmitter top-board and the INAP375T
APIX 2 onboard transmitter, the following connector is used:
99S20D-40MA5-D of Rosenberger company
Pinout:
1 – LVDS Out– 2 – LVDS In+ 3 – LVDS Out+ 4 – LVDS In–
5 – V Out+ 6 – V Out– Shield – GND
The APIX 1/ APIX 2 configurations can be adapted if required.
Default configuration: 500Mbit/s bandwidth, 24 bit color depth, rising
pixel clock frequency edge and dedicated upstream channel.
For the connection, use only STP cables with 100Ω impedance and
corresponding connector.
When connecting the cables, please pay attention to connect the wire
pairs always to LVDS+ and LVDS– each.