GoPass AVL-901, Hardware Installation Manual, Page: 9 / 19

8
3. Precaution before Installation

Check if all the parts are included.

Prepare a SIM card for GSM communication. Use some other mobile phone to
confirm that the PIN code has not been set, and that it can dial out and receive
telephone calls without problem.

Before install the SIM card , make sure to cut off power from the AVL unit. The
correct installation method is to push the tray completely into the AVL unit, until
you feel it is hooked by something.

Find a suitable place inside the car for installing the unit.

Check if all the wiring has been connected correctly; then connect the AVL unit
to the power source.

It takes around over 20 minutes for the very fist time positioning.

The factory default password is
“
8888
”.