GoPass AVL-900, User Manual

Page: 36 / 74

35
[Driver Options]
Some mapping software requires GPS data to be received continuously, to meet
the requirement, our driver can send GPS data to the mapping software virtually.
Tap Tools
→
“ Driver Options ” to set the time interval to send the GPS data to your
mapping software virtually. (The default interval is 10 seconds. Please keep the
default value, if you are not very well-known about the setting).
Un-tick “ Use virtual sending ”, if you do not need the GPS data to be sent virtually;
tap on “ Save ” will prompt the “ Success ” screen; after then tap on “ OK ” to leave
the setting.