GoPass AVL-900, User Manual

Page: 12 / 74

11
6. Wiring Description
z
Connect the wiring correctly.
z
The AVL unit should be connected to power source, after all the wiring work
has been completed and checked.
z
GPS antenna is used to receive satellite signals in the sky. It should be fixed
to face the sky; and should not be covered or shielded by any object
containing metal, such as the metallic windshield.
z
Microphone should be fixed on top of the driver’s seat or around the steering
wheel.
z
Wiring connections must be firm and reliable; and the joints should be
wrapped with insulating tape tightly.
z
After the microphone has been connected and tested, the joints should be
wrapped with insulating tape tightly, so that they will not become loose.
z
The unused electrical wire should be properly insulated.
7. Description of the LED Indicators
SYSTEM STATE
(RED LAMP)
GPS STATE
(ORANGE LAMP)
GSM/GPRS STATE
(GREEN LAMP)
Flash NC
GPS is on, but
position not yet fixed
GSM is on, and
can be used normally
Constant
Glow
normal
GPS is on, and
position is fixed
GSM online
Constant
Dark
in trouble
Or
no power
GPS is off, or
GPS has troubles
GSM is unusable. It is in
trouble or improperly
installed SIM card
8. Inspection Item after Installation
z
After connected to the power source, the RED LED Indicator should be
“constant glow”.
z
The orange indicator for GSM/GPRS state should flash normally.
z
The status of the red indicator for GPS state
- go to an open air place, check the status of the red indicator
- make sure GPS has got position fixed, and the red indicator “constant glow”
- make a phone call to the AVL unit, and ask it to report its current position
z
Complete the installation, and restore the interior of the car.