28
• Select a suitable socket spanner. When attaching it make sure that the socket
spanner is firmly and securely seated on the socket spanner holder
(5).
• Place the tool firmly on the tyre’s fixing element to be worked on.
• To tighten (clockwise) push the rocker switch to the rotation to the right
position
(F) (3).
Before use, check that the direction of rotation is correct.
The tightening torque is adjustable within a range between 100 Nm
and 350 Nm in steps of 10. If you press the - / + buttons you can
set the tightening torque to the desired level. The current torque is
shown on the large display located above.
This impact wrench is suitable for tightening and loosening bolts,
screws and nuts. Do not use it for any other purposes. Incorrect use
of this tool may cause personal injury or damage to property.
• To loosen bolts (anticlockwise) push the rocker switch to the rotation to the
left position
(R) (4).
Before use, check that the direction of rotation is correct.
• Loosening wheel nuts/bolts may require several impacts.
• Release the rocker switch
(3 or 4)
to stop the tool.
• After you have finished working, pull the mains plug
(2)
out of the mains
socket.
Remarks:
• Strictly observe the manufacturer’s instructions regarding the
torque to use. There are no general rules here for torque levels
for aluminium or steel rims.
• Please check the correct seating of the wheel nuts/bolts with a
torque wrench before the vehicle is driven off.
• Check the correct seating of wheel nuts/bolts with a torque
wrench after 30-50 km of driving.
75544-AZ-Schlagschrauber-GYD-IM-INT-OEF_191105.indd 28
08.11.19 15:08
