Page 30
P30U Instruction Manual Revision : 1
1st December 2006
7.3 Maintenance
Daily
Monthly
(depending on usage)
Annually
more frequently in poor conditions or
with high usage
Check condition of the consumables regularly.
Top up water reservoir with distilled /
demineralised water if required.
Check for water and air leaks. If used in a dusty
environment, clean the air compressor intake filters.
Remove excessive dust from inside the machine
taking care not to damage any mechanical or
electrical component and avoid exposure to this
dust which may represent a health hazard. Use
personal protection as necessary.
Clean or replace the compressor air intake filter.
Check tightness of all electrical and mechanical
connections. Check the correct operation of all
controls and indicators.
If possible check the conductivity of the cooling
water. If necessary replace the water and the de-
ionising cartridge. This may also be required
following a known contamination of the cooling
circuit, for instance if the hose connectors become
dettached underwater.
Goodwin Air Plasma Cutting Systems are designed so that only a minimum amount of maintenance is
required. By following a regular and careful maintenance procedure, the equipment will give a long productive
life.