2. Display area
Line 1---Working status information
This area displays the status information. "
Waiting Pac=0.0W
"
indicates the inverter is
standing by for power generation; "
Checking**S Pac=0.0W
" (checking time is based on
safety, and varies from country to country) indicates the inverter is self-checking, counting
down and preparing for power generation. "
Normal Pac=6000.0W
"
indicates the inverter is
generating power. If any condition of the system is abnormal, the screen will display an error
message. Refer to Table 4.3.
Through key operation, the screen can display different information such as operation parame-
ters and power generation status in this area. There are two levels of menus, and the flow chart
of first level menu is shown as the diagram.
3. Use of the display
There are 2 modes of button operation: short press and long press.
4. Use of the display and LCD display
The display allows accessing the configuration of the basic parameters. All the language, All the
language, time and country setting can be configured by buttons. The menu, shown in the LCD
display area has two levels of menu. Short and long key presses will take you to different menus
and through each menu. Items in the first level menu will be locked if the second level menu
doesn't show. For these items, when the key is pressed for two second, the LCD will display the
word "
Lock
"
followed by data relating to the first level menu item. The locked menu can only
be unlocked under system mode switching, fault occurrence or key operation.
In all levels of menu, if no action is taken for 20 seconds, the backlight of the LCD display will be
switched off, and the display will automatically revert to the first item of the first level menu,
and then any modifications made to the data will be stored into internal memory.
4.2 User interface and use of the display
Set Safety Country:
If display shows "
GW6K-DT Pac=6000.0W
", then long press (2S) the key to enter the second level
menu. Short press to browse the safety country available. Please wait for 10s after choosing the
suitable safety country ,then display will show "
setting...
" and jump to "
Set OK
"
or "
Set Fail
".
1. A schematic of the display screen is shown as below:
Display area is divided as follows:
4 System Operation
4.1 Indicator Lights
Normal
Pac=6000.0W
Line 1
Line 2
Inverter with LCD, indicator lights in Yellow/Green/Red correspondently refer to
ON = WiFi CONNECTED / ACTIVE
BLINK 1 = WiFi SYSTEM RESETTING
BLINK 2 = WiFi ROUTER PROBLEM
BLINK 4 = WiFi SERVER PROBLEM
OFF = WiFi NOT ACTIVE
ON = INVER TER IS FEEDING POWER
OFF= INVER TER IS NOT FEEDING POWERATTHE MOMENT
ON = FAULT OCCURRED
OFF = NO FAULT
POWER
RUN
FAULT
12
11
For inverters without LCD, indicator lights in Green/Green/Green/Red correspondently refer to
ON = EQUIPMENT POWER-ON
OFF= EQUIPMENT POWER-OFF
ON = INVERTER IS FEEDING POWER
OFF= INVERTER IS NOT FEEDING POWE
SINGLE SLOW FLASH = SELF CHECK BEFORE GRID CONNECT
SINGLE FALSH = WILL CONNECT WITH GRID
ON = WiFi CONNECTED / ACTIVE
BLINK 1 = WIRELESS SYSTEM RESETTING
BLINK 2 = WIRELESS ROUTRE PROBLEM
BLINK 4 = WIRELESS SERVER PROBLEM
OFF = WIRELESS NOT ACTIVE
ON = FAULT OCCURRED
OFF = NO FAULT
FAULT
RUN
POWER
SEMS