05 System Installation
15
User Manual V1.0-2022-02-18
CAN COM Port
RJ45 Modular Connector
PIN
PIN Definition
4
CAN_H
5
CAN_L
1, 2, 3, 6, 7, 8
N/A
5.4.3 Connecting the COM Cable
Notice
• The two communication ports are the same.
•
Connect the cable to any one of the two communication ports. And connect the terminal
resistor to the other port.
•
For the EHB series and GE series inverters, the manufacturer does not supply the battery
communication cable.
•
Please refer to the following pin definitions if you need to make a new battery
communication cable.
Step1:
Disassemble the waterproof module.
Step2:
Thread the cable to the waterproof module.
Step3:
Connect the communication cable to the Battery Module.
Tighten the nut.
