02 Safety Precaution
User Manual V1.0-2022-10-15
01
02 Safety Precaution
NOTICE
The Lynx C BS are designed and tested strictly in compliance with related safety rules. Read and
follow all the safety instructions and cautions before any operations. Improper operation might
cause personal injury or property damage as the products are electrical equipment.
2.1 General Safety
NOTICE
• The information in this user manual is subject to change due to product updates or other
reasons. This guide cannot replace the product labels or the safety precautions in the user
manual unless otherwise specified. All descriptions here are for guidance only.
• Read through this document before installation to learn about the product and the
precautions.
•
All operations should be performed by trained and knowledgeable technicians who are
familiar with local standards and safety regulations.
•
Use insulating tools and wear personal protective equipment (PPE) when operating the
Lynx C BS products to ensure personal safety.
•
Strictly follow the installation, operation, and configuration instructions in this manual. The
manufacturer shall not be liable for equipment damage or personal injury if you do not
follow the instructions. For more warranty details, visit:
https://en.goodwe.com/warranty
.
2.2 Installation Precaution
WARNING
•
Please keep Power Off before any operations to avoid danger. Strictly follow all safety
precautions outlined in this manual and safety labels on the equipment.
•
The Lynx C BS is a high voltage system. Do not touch or operate it. Keep away from it. Only
professionals are allowed!
•
Please use appropriate tools and take protective measures when installing and maintaining
heavy equipment. Improper operations will cause personal injuries.
•
Do not use the battery module or Power Control Unit (hereinafter referred to as PCU in
short) if it is defective, broken, or damaged.
•
Do not disassemble, modify, or replace any part of the battery module or PCU without
official authorization from the manufacturer.
•
Pay attention to the negative and positive during installation to avoid reverse polarity
connection. Otherwise the short circuit may cause personal injuries and damage to the
equipment.