MACHINE SPECIFICATIONS
Max. swing diameter
Swing over saddle
Max. turning diameter*1
Standard turning diameter*1
Max. turning length*1
Max. weight load*3
Chuck size
Bar capacity
Hole through spindle
Spindle bearing diameter
Hydraulic cylinder
Spindle nose
Motor output ( Cont. )
Motor output ( 30 min. )
Motor full output speed
Spindle drive system
Spindle drive ratio
Spindle speed range
Spindle full output speed
Cs-axis drive motor
Min. spindle indexing angle
Dynamic accuracy
Max. X-axis travel*1
Max. Z-axis travel*1
X / Z axes rapids
Slide way type
Feed rates
X-axis servo motor
Z-axis servo motor
X-axis ball screw Ø / pitch
Z-axis ball screw Ø / pitch
X / Z axes thrust ( Cont. )
CAPACITY
SPINDLE
X & Z AXES
GLS-150
11 kW ( 15 HP )
15 kW ( 20 HP )
750 rpm
Direct Belt Drive
Bz-sensor
± 0.001°
± 0.002°
GLS Series
Construction
Spindle
Turret
Multi-Tasking
Motor output ( Cont. )
Motor output ( 30 min. )
Bar capacity
210 mm ( 8.26" )
520 mm ( 20.47" )
30 m/min. ( 1,182 IPM )
Linear Guide Way
1~4,800 mm / min. ( 1~189 IPM )
AC 2.7 kW ( 3.6 HP )
AC 2.7 kW ( 3.6 HP )
Ø 32 mm ( 1.26" ) / Pitch 10
Ø 32 mm ( 1.26" ) / Pitch 10
769 Kg ( 1,690 lbs. )
Ø 500 mm ( 19.68" )
Ø 380 mm ( 14.96" )
Ø 360 mm ( 14.17" ) / Ø 280 mm ( 11.02" )*2 [ Ø 250 ( 9.84" )Single turn ]*5
Ø 204 mm
500 mm
85 Kg ( 187 lbs )
Ø 8"
( Big-bore )
Ø 65 mm ( 2.55" )
Ø 76 mm ( 2.99" )
Ø 110 mm ( 4.33" )
Ø 10"
A2-6
1:1 ( Opt. 211:171 )
45 ~ 4,500 rpm
750 rpm
—
—
—
Cs-AXIS SPINDLE ( OPTIONAL )
BUILT-IN SPINDLE MOTOR ( OPTIONAL )
GLS-200
GLS-260
Specifications are subject to change without notice.
*1 Individual models may vary, please see interference drawings.
*2 For M (Live-tooling turret) models only.
*3 Work-piece supported by chuck & tailstock.
Ø 254 mm
Ø 10"
Ø 65 mm ( 2.55" )
Ø 76 mm ( 2.99" )
Ø 120 mm ( 4.72" )
Ø 10"
A2-8
1:1
40 ~ 4,000 rpm
750 rpm
—
—
—
Ø 165 mm
Ø 6" ( Big-bore )
Ø 51 mm ( 2.00" )
Ø 61 mm ( 2.4" )
Ø 90 mm ( 3.54" )
Ø 8"
A2-5
1:1 ( Opt. 211:151 )
60 ~ 6,000 rpm
750 rpm
5.5 kW ( 7.4 HP )
7.5 kW ( 10 HP )
Ø 45 mm
