FEATURES
Tri-color
status light
Built-in lub. oil
collection system
The optional load monitoring function is used to detect
abnormal load of tools by monitoring the variation in spindle
motor and servo motor loads during the cutting process.
When abnormal loads are detected, the machine will stop at
program end (M30) or immediately (feed hold status) according
to tool life value or tool break value respectively.
GLS Series
Construction
Spindle
Turret
Multi-Tasking
Tool Setter
Load Monitoring
Coolant Tank
Coolant Pump
Chip Conveyor
The optional RENISHAW HPMA tool presetter utilizes a
motorized arm to lower the tool probe into position. An auto
tool check function further increases tool touch-off
efficiency.
Coolant system features a roll-out
coolant tank for easy maintenance
and high-pressure coolant pump for
increased cooling power.
3-Jaw chuck
w/ Soft Jaws x 1 set
The standard chip conveyor features adjustable timers that
allow the operator to set operation intervals according to the
amount of chips generated by the machine. Thus, reducing
coolant loss to a minimum.
