05
28
X-1 MINI PRO OWNER’S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Section 2:
Unpacking
Inspect the shipping container of your new press prior to opening. Ensure it is free of any handling damage that
may have occurred during shipping. Notify the shipping carrier of any damage to the shipping container as soon as
it is received.
Carefully open the shipping container, inspecting for any damage.
If any items are damaged, notify the freight carrier as soon as possible.
Review the enclosed parts list below. Inspect all enclosed parts carefully and make sure no parts are missing. If
any parts are missing or damaged, please contact Goodnature.
Machine comes bolted to the base of the packaging to prevent damage. With the supplied 9/16” wrench, remove
bolts from feet of machine by turning them counter-clockwise. These can be accessed from the side of the crate,
underneath the platform.
Once machine has been unbolted from the base, the feet can be attached to the machine by screwing them into the
legs.
Machine can be lifted onto the counter, table, or cart where it is intended to be used.
After unpacking, review the X-1 Mini Pro diagrams in section 3 to become familiar with the features and
components of the machine.
Prior to applying any electrical power to the equipment, complete the ASSEMBLY steps of the assembly section.
Machine should be lifted by a minimum of two able people. One person can lift from the front legs of the machine near
the feet, and one person can lift from the rear legs. We recommend removing all removable parts before lifting.
Drop
Drop
Drop
Drop
Drop
Drop
Drop
Drop
LIFT INSTRUCTIONS
