manualshive.com logo in svg

Goodmans VP2500-A, User Manual

Share
Download
Goodmans VP2500-A User Manual Download Page 24

Still picture and slow-motion

Still picture

While you are playing a cassette, press the  

(pause) button.

You will see a still picture, although there will be some picture
interference. Each time you press the pause button, the picture
will move on one step.

• You may be able to improve the quality of the still picture if

you keep pressing PR- or PR+ button.

Slow-motion

While you are playing a cassette keep pressing the 

button

to control the slow-motion speed in 6 steps.

As with the still picture, you will get some picture interference. 

• You may be able to improve the quality of the picture if you

keep pressing PR- or PR+ button to move the interference
stripes.

23

v i d e o   c a s s e t t e s

P l a y i n g

VCR

VCR

• Still picture and slow-motion playback cause interference stripes, colour loss and picture

vibration. These things are quite normal with this type of video recorder.

• If still picture or slow-motion lasts longer than five minutes the video recorder will stop,

to protect the video tape.

Summary of Contents for VP2500-A










































Reviews:

No comments

Brands by name

Popular brands

Load more brands