Goodmans GTVL32W8HD User Manual Download Page 2

IMPORTANT SAFEGUARDS   

IMPORTANT

The  wires  in  the  mains  lead are coloured in
accordance with the following code:

If  your  product  is  fitted with a moulded plug
which  requires replacement please cut off the 
plug  and  dispose of safety. The  replacement
plug  should  then be rewired  as  shown in the 
diagram.

As the colours of the wires in the mains lead  of 
this  apparatus  may  not  correspond  with  the 
coloured  markings  identifying  the terminals in 
your plug, proceed as followings.
The  wire  which  is  coloured  green and yellow
must  be  connected  to  the  terminal  which  is 
marked with the letter E, or by the earth symbol
(      ), or colour green or green and yellow. 
The  wire   which   is   coloured   blue  must  be 
connected to the terminal which is marked with
the letter N or coloured blue or black.
The  wire  which  is  coloured  brown  must  be 
connected to the terminal which is marked with
the letter L or coloured red.

This appliance must be earthed.

If a 13 AMP (BS 1363) Plug is used, fit an ASTA 
approved 3 or 5 AMP Fuse.

BLUE      : NEUTRAL
BROWN : LIVE
GREEN & YELLOW : EARTH

GREEN
   

BLUE

(Neutral)

FUSE

BROWN

(Live)

&

YELLOW

(Earth)

32

HDMI CABLE

HDMI CABLE

Warning: To prevent shock do not operate this appliance in rain / moisture conditions. To 
clean this product disconnect the TV from the mains supply. Only use a damp cloth 
moistened with soapy water. Do not use chemical cleaners as this may damage the finish 
of the LCD screen.

Summary of Contents for GTVL32W8HD














Reviews: