PREPARATION
PREP
AR
TION
How to setup the TV
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal (refer
to page 15).
Connect the DC plug of the AC-DC power adapter to the DC 12V IN socket at the back of the
TV. Connect the other end of this cable to a 3 pin Power Cord.
Insert the 2 batteries supplied in remote control.
1
2
3
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner etc.) on the
remote, as it may suffer damage.
Pull the tab of the back cover and pull up on
the cover to open the battery compartment
of the remote control.
Insert two AAA size batteries.
Make sure to match the (+) and (-) ends of
the batteries with the (+) and (-) ends indicated
in the battery compartment.
Align the lower tabs of the back cover to the
remote control and squeeze the cover into
place.
