PREPARATION
PREP
AR
TION
S VIDEO
-
AUDIO IN
Y
Pb
Pr
L
R
PC VGA IN
/
HDMI
PC AUDIO IN
VIDEO
AUDIO IN
L
R
SCART
VHF/UHF IN
DC 12V IN
DIGITAL OUT
Refer to the owner’s manual of the external equipment to be connected.When connecting external
equipment, do not connect any AC power cords to wall outlets until you have completed all the
connections.
Basic Connection: Connecting an aerial
Connect your existing TV aerial to the Aerial input socket on the TV.
The Aerial input socket can be connected with the ATV/DTV Aerial
.
Connect all AC power sources before turning on the TV.
Press the POWER button on your remote to turn on your LCD TV.
a. After connecting an aerial to your LCD TV and connecting the mains cable to the
TV and 230VAC mains socket, a blue light will show on the front centre panel of the TV.
b. Press the POWER button, the red light will change to green and the First Time
Installation screen will show:
1. Make sure an aerial is fitted then press OK button on the remote to start
the Auto Programme Scan (APS).
2. In a short while you will see the TV programmes briefly as each channel is
received and stored in the memory. When APS is completed BBC1 will show,
press CH+/- buttons to view the other channels stored.
c. To power off press the POWER button, the green light will change to red.
Press the INPUT button and choose TV or DTV mode then press OK to select.
Insert the supplied mains cable to the mains socket located on the rear of the TV.
Connect the other end of this cable to a 3 pin mains socket.
5
TV Aerial
Aerial/75-ohm
coaxial input
connect the AC-DC
adapter to the DC IN
socket at back of the TV.
Unplug from a
wall outlet
DC 12V IN
