FM Radio Operation
1. If the CD Micro System is not in FM radio mode, press the FUNC button until you reach
FM mode.
2. If you have radio stations stored in memory, use the M+ and M- buttons to select the
required station.
Using the FM Radio
Before using the FM radio, you must first extend the aerial (a vertical position is recommended).
This ensures that the maximum signal strength is available when the radio begins to scan.
Extending the aerial also ensures the best possible sound quality.
3. If you do not have radio stations stored in memory, use the TUNE-/SKIP- or TUNE+/SKIP+
buttons to locate the required station.
Scanning for Radio Stations
1. Press and hold the TUNE+/SKIP+ button to begin scanning. The CD Micro System will
scan until it finds a signal.
2. To discard the station and resume the scan, press the TUNE+/SKIP+ button again.
3. To store the station in memory, press the MEM button. The first empty memory memory
slot is displayed.
4. (Optional) Use the M+ and M- buttons to select a memory slot. There are 20 memory slots
in your CD Micro System.
5. Press the MEM button to store the station.
GMC01
4.6
4.7
