GMC01
Troubleshooting
5
If a fault occurs, first check the points listed below before taking the CD Micro System for repair. Do
not dismantle the CD Micro System as there is a risk of electric shock.
If you are unable to rectify a problem by following these hints, consult your dealer or service centre.
CD Micro System does not respond
(no power).
Check that the mains power adaptor has not come
loose from the back of the CD Micro System.
Check that the mains power adaptor is plugged into a
suitable power outlet and that the mains power supply is
switched on.Connect the power to a different power outlet.
Check that there are no obstructions between the remote
control and the CD Micro System.
Aim the remote control directly towards the remote sensor
on the CD Micro System.
No response from the remote control.
No sound.
CD will not play.
CD skips while playing.
poor radio reception
USB not loading.
Bluetooth device not loading.
WARNING:
Under no circumstances should you try to repair the CD Micro System yourself, as this
will invalidate the warranty.
Problem
What to do
Insert a new battery.
Check that the volume has not been set low or muted.
Check that the CD is correctly loaded, label side up.
Check that the format of the CD is supported.
Check that the CD surface is not damaged.
Wipe CD with clean cloth or use another disc.
Make sure the aerial is unwound and extended fully.
Adjust the tuning to improve reception.
Avoid close proximity to other electrical appliances which
may cause interference.
Check the USB device is correctly fitted to the CD Micro
System.
Check that the files on the USB device are compatible with
the CD Micro System.
Check that the CD Micro System is correctly paired with the
Bluetooth device.
