Installation
Locate the receiver in the room where direct light
does not strike the screen.
Total darkness or a reflection on the picture screen
can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
Allow enough space between the receiver and the
wall to permit ventilation.
Avoid excessively warm locations to prevent
possible damage to the cabinet or premature
component failure.
This TV operates on a Dc supply provided by the AC-
DC adaptor. The voltage is as indicated on the label
on the back cover. Only use the AC-DC adaptor
supplied with the TV and never apply an AC mains to
the TV directly. The AC-DC adaptor operates on an
AC mains supply, the voltage is as indicated on the
label of the AC-DC adaptor. Connect the DC plug of
the AC-DC adaptor to the DC 12V socket at the back
of the TV. Connect the AC-DC adaptor and Its mains
cord. Insert the mains plug in the wall socket having
a mains voltage of 100-240V.
Do not install the receiver in a location near heat
sources such as radiator, air ducts, direct sunlight, or
in a place somewhere like close compartment and
close area.
Do not cover the ventilation openings when using the
set.
16:9 Aspect Ratio
System (PAL/SECAM/BG/DK/LL NTSC M)
DVD, CD,CD-R/DIVX
0
0
Viewing Angle 176 /176
PC monitor mode (PC/VGA input)
Scart (RGB)
Headphone jack
Sleep Timer
NICAM stereo
Teletext
For TV Features
,
-9-
Summary of Contents for GLCD17W2DVD
