CONTENTS
P. 2
MULTIPATH DISTORTION / MUTING
Please note: An integrally mounted screen aerial may give rise to increased multipath
distortion or spurious muting of the audio output. This is normal and to be expected.
The use of an externally mounted rod aerial may reduce or possibly eliminate such
problems.
Most screen aerials require a 12 volt supply to operate correctly. Please check that this
has been connected to the +12 volt antenna wire of your radio. If you are in any doubt
of this connection please contact the vehicle dealer or Goodmans installation helpline.
IMPORTANT: Do not forget to remove the transit screws on top of the unit,
before removing the fixing cage and installing the unit.
Failure to do so will result in the CD not playing.
Accessories ...................................................................................................3
Introduction ...................................................................................................4
Installation .....................................................................................................8
Location of Controls and Functions..........................................................11
Operation .....................................................................................................12
Care and Maintenance ...............................................................................16
Troubleshooting ..........................................................................................17
Specifications..............................................................................................18