Goodmans 329944, User Manual

Page: 9 / 24

329944
Quick Setup 3
Connecting an External Source
Connect an external source to the portable DVD player to
allow playback on the integrated display.
1. Insert the 3.5mm end of the supplied AV adapter cable
into the AV INPUT socket (P) on the side of the unit.
2. Connect the other ends of the adapter cable to an RCA
AV cable (not supplied), as shown in the diagram.
Take note to match the colours when connecting.
3. Red & white sockets carry audio and must be connected
to the AUDIO OUTPUT of the external source. The yellow
cable is the video cable and must be connected to the
yellow video output on the external source.
4. After making the connections you must press the MODE
button on the Portable DVD player (C) to switch to the
‘AV IN’ mode.
5. Should you need to switch back to the internal DVD
player, press the MODE button on the main unit (C) again.
If your video source only has a SCART output, you can
purchase a SCART adaptor; and connect the three coloured
jacks to the same coloured sockets on the adaptor.
Then connect the adaptor to your video source.
In-Car Headrest Mount
Follow the below insructions to mount the portable DVD
player to a car headrest.
1. Follow the instructions in section ‘3.5’ to rotate the
display 180
o
and fold down flat onto the buttons and
disc compartment.
2. Once flat slide the portable DVD player into the
headrest harness with the display facing outwards
through the rectangular hole. Use the velcro tabs to
secure the player.
3. Use the webbing straps to mount the harness to a
headrest. Adjust the toggles to ensure the harness is
secure.
3.8
3.5mm AV Cable
RCA AV Cable
DVD Player
External DVD Player
3.9