![Goodman AC9S80 Service And Troubleshooting Download Page 10](http://html1.mh-extra.com/html/goodman/ac9s80/ac9s80_service-and-troubleshooting_2243408010.webp)
SYSTEM OPERATION
10
Safety
Please adhere to the following warnings and cautions
when installing, adjusting, altering, servicing, or operating
the furnace.
WARNING
To prevent personal injury or death due to improper instal
-
lation, adjustment, alteration, service, or maintenance, refer
to this manual. For additional assistance or information,
consult a qualified installer, servicer, agency or the gas
supplier.
WARNING
This product contains or produces a chemical or chemicals
which may cause serious illness or death and which are
known to the State of California to cause cancer, birth de
-
fects or other reproductive harm.
WARNING
To prevent personal injury or death due to improper instal
-
lation, adjustment, alteration, service, or maintenance, refer
to this manual. For additional assistance or information,
consult a qualified installer, servicer, agency or the gas
supplier.
WARNING
To prevent possible property damage, personal injury or
death due to electrical shock, the furnace must be located
to protect the electrical components from water.
Charge (ESD) Precautions
NOTE:
Discharge body’s static electricity before touching
unit. An electrostatic discharge can adversely affect electri
-
cal components.
Use the following precautions during furnace installation and
servicing to protect the integrated control module from dam-
age. By putting the furnace, the control, and the person at
the same electrostatic potential, these steps will help avoid
exposing the integrated control module to electrostatic dis
-
charge. This procedure is applicable to both installed and
uninstalled (ungrounded) furnaces.
1. Disconnect all power to the furnace. Do not touch the
integrated control module or any wire connected to
the control prior to discharging your body’s electro-
static charge to ground.
2. Firmly touch a clean, unpainted, metal surface of the
furnace near the control. Any tools held in a person’s
hand during grounding will be discharged.
3. Service integrated control module or connecting wir-
ing following the discharge process in Step 2. Use
caution not to recharge your body with static electrici-
ty; (i.e., do not move or shuffle your feet, do not touch
ungrounded objects, etc.). If you come in contact with
an ungrounded object, repeat Step 2 before touching
control or wires.
4. Discharge any static electricity from your body to
ground before removing a new control from its con-
tainer. Follow Steps 1 through 3 if installing the control
on a furnace. Return any old or new controls to their
containers before touching any ungrounded object.
Product Application
This product is designed for use as a residential home gas
furnace. It is
not
designed or certified for use in mobile
home, trailer, or recreational vehicle applications.
This furnace can be used in the following non-industrial
commercial applications:
Schools, Office buildings,
Churches, Retail stores, Nursing homes, Hotels/motels,
Common or office areas.
In such applications, the furnace
must be installed with the installation instructions.
Goodman & Amana
®
80% furnaces are ETL certified appli
-
ances and are appropriate for use with natural or propane
gas. (
NOTE:
If using propane gas, a propane conversion kit
is required).
IMPORTANT NOTE: The 80% furnace cannot be installed
as a direct vent (i.e., sealed combustion) furnace. The
burner box is present only to help reduce sound trans
-
mission from the burners to the occupied space.
To ensure proper installation, operation and servicing, thor-
oughly read the installation and service manuals for specif-
ics pertaining to the installation, servicing and application of
this product.
WARNING
Possible property damage, personal injury or death due to
fire, explosion, smoke, soot, condensation, electrical shock
or carbon monoxide may result from improper installation,
repair, operation or maintenance of this product.
WARNING
To prevent property damage, personal injury or death due to
fire, do not install this furnace in a mobile home, trailer, or
recreational vehicle.
To ensure proper furnace operation, install, operate, main-
tain and service the furnace in accordance with the instal-
lation, operation and service instructions, all local building
codes and ordinances. In their absence, follow the latest edi-
tion of the National Fuel Gas Code (NFPA 54/ANSI Z223.1),
and/or CAN/CGA B149 Installation Codes, local plumbing or
waste water codes, and other applicable codes.
The rated heating capacity of the furnace should be greater
than or equal to the total heat loss of the area to be heat-
ed. The total heat loss should be calculated by an approved
method or in accordance with “ASHRAE Guide” or “Manual
J-Load Calculations” published by the Air Conditioning Con
-
tractors of America.