20
21
Check Strip
CHECK
CH
How to check meter by check strip
How to delete memory
The Check Strip can be used in 2
ways:
1.
2.
To test only the function of
the meter and not complete
BGM test system. Please
check the complete test
system with Control Solution
To delete all test memories.
Insert the check strip into strip slot with label side
up as above.
You should obtain an “OK“ reading within 10
seconds, which means your meter is working
properly.
Remove the check strip to exit. Meter will auto-
matically turn off.
NOTE
:
If you do not get "OK" reading but appear other
error message, turn off the meter by remove check strip
from the meter. Then check the battery and repeat the
test. If the second result persists, contact customer
support at 1-855-692-3511 or your healthcare provider.
1.
2.
Insert check strip into strip slot with label side up.
After “OK” displayed, press and hold the Set
button until flashing “dEL” shows up with a beep
sound.
Press and hold the Mem button until you hear a
beep sound, Meter will display “OK” before
turning off and all the memory has been deleted
successfully.
Remove the check strip from the meter.
1.
2.
3.
4.
