All installation must be carried out by a competent person or qualified electrician. Before
connecting the mains supply ensure that the mains voltage corresponds to the voltage on the
rating plate.
Direct Connection
The appliance must be connected directly to the mains using an omnipolar circuit breaker with a
minimum opening of
3 mm between the contacts.
The installer must ensure that the correct electrical connection has been made and that it
complies with
the wiring diagram.
The cable must not be bent or compressed.
Regularly check the power cord for damage.
WARNING: This is a Class I appliance and MUST be earthed.
This appliance is supplied with a 3 core mains cable coloured as follows:
Brown = L or Live
Blue = N or Neutral
Green and Yellow = E or Earth
220-240V~
N
L
L
N
N
L
L
Blue
Br
ow
n
(
(
(
This appliance requires a 40 Amp Residual Current Device (RCD).
To avoid the risks that are always present when you use an electrical appliance it is important
that this appliance is installed correctly and that you read the safety instructions carefully to
avoid misuse and hazards. Please keep this instruction booklet for future reference and pass it
on to any future owners. After unpacking the appliance please check that it is not damaged. If in
doubt, do not use the appliance but contact Customer Services.
The manufacturer declines all liability for damage caused to persons and objects due to
incorrect or improper installation of the appliance. Any permanent electrical installation must
comply with the latest wiring regulations applicable to your country and for your own safety a
qualified electrician or contractor should undertake the electrical installation.
EN
Electrical Installation
12
EN Electrical Installation
FR Installation électrique
PL Instalacji elektrycznej
RO Instalația electrică
