16
User‘s Manual
4. Compare all products to be compatible to each other.
5. Leave 50 mm space around all dimensions of the transformer
when installing:
6. First, connect the secondary circuit (SEC / 12 V DC), by
removing the cap with a suitable Phillips head screwdriver.
7. On the secondary side are now 2 free clamps.
the polarity is printed on the product housing. the negative pole
is marked with „-“. the positive pole is marked with „+“ .
8. Plug your LED lights in correct polarity to the terminalbucks of
the secondary circuit (SEC / 12 V DC).
9. Use a cable cross-section of about 0.75 mm.
make sure that the overall performance of the connected lamps
do not exceed the maximum supported voltage of the transfor-
mer.
9. If all consumers are connected to the secondary side right,
connect the primary circuit (PRI / 200-240 V AC) with its 2
clamps on to the electricity grid.
10. Make sure, all connections are tight.
11. Reattach the cover caps and tighten them.
12. Fix the product with the 2 mounting holes on a firm, safe
place, if possible.
13. Turn the mains fuse on.
operating:
The voltage transformer works when a voltage is applied on the
primary side. It does not have its own switch and is maintenance-
free.
Summary of Contents for SET 12-06 LED slim
Page 22: ...22 User s Manual ...
Page 23: ...23 ...
