English
Connection
1. Connect your audio/video devices (CCD camera, DVD player) which are to be fed
to the modulator’s SCART input (1) or use the modulator’s Cinch input (2).
Please observe the correct signal source selection:
Yellow = video signal
Red = right audio signal
White = left audio signal
2. Now connect your house aerial or broadband cable to the modulator’s aerial
input. (4)
3. Connect your TV set to the modulator’s aerial output. (5)
4. Now connect the included power supply unit.
5. Caution: Only use the included power supply unit!
Other voltages or incorrect polarisation can damage the device.
6. It is possible to connect a further device (e.g. VCR) via SCART cable at the SCART
output (loop through). (3)
Application
1. Once all connections have been carried out, switch ON the Power ON/OFF switch.
2. Set the output channel to channel (K21 – 69) via the c/- buttons.
The LED display indicates the set channel.
3. Select an unoccupied TV channel, otherwise picture overlay and poor sound can
occur.
Wentronic GmbH hereby declares that Article No. 67238 complies with the basic requirements and other relevant
regulations of directives 2004/108/EC and 2006/95/EC.
