General Notes
Read this user‘s manual completely and carefully. It is part of the product and contains important
notes for operating. Keep this document for other users or for personal reference. This user‘s manu
-
de as download version where applicable or postal via the address at the end of this page.
Safety Instructions
Risk of life by suffocating
>> Protect small parts and insulation material against unintentionally use.
Risk of injury by tripping and falling
>> Let a professional do the installation work.
>> Place, transport and install product, parts and acceories in a safe way.
>> Let a second person help you.
Risk of injury by cutting
>> Protect packaging materials against unintentionally use.
Risk of self-intervention and misuse
>> Do not modify or alter either the product or the accessories!
Description and Function
This product is a weather protection for LNBs and is made to protect satellite LNBs from wind and precipitation. It‘s tiltable individu
-
ally and fits to all commecrial satellite dishes. Different use causes loss of warranty.
Scope of Delivery
Installation material
Packing content
Description
Screws
2 x M6x60
(A)
4 x M6x10
(B)
Nuts
2 x M6 butterfly nut
(C)
4 x M6 SW10
(D)
Washers
2 x M6
(E)
Weather protection
1 x
(F)
Holder top
1 x
(G)
Holder bottom
1 x
(H)
Preparing
>> Check the packing content by comparing it to the scope of delivery regarding completeness and integrity.
>> Compare the specifications of all used devices and products and make sure they are compatible to each other.
Installing
1.
Connect the holder top (G) to the weather protection (F) by screws (B) and
nuts (D) like shown.
Figure 1
2.
Set the part combination of 1. onto the LNB holderarm of your satellite dish close
to the LNB.
Figure 1
3.
Connect the holder bottom (H) to the holder top (G) by using the screws (A), the
washers (E) and the nuts (C).
Figure 1
4.
Attend to following adjustments:
>> Adjust the weather protection centered to the LNB in top view.
Figure 2
>> Install the weather protection parallel to the LNB.
Figure 3
Figure 1
>> Let minimum 2 cm distance between LNB and weather protection.
Figure 3
User‘s manual for
Weather protection for LNBs
1/2
